廠房隔熱降噪 最佳解決方案
節能寶鋁箔隔熱板

適用 : ESG廠房隔熱.綠能廠房規劃.綠能建築

極佳隔熱性能
三層隔熱材料複合，隔音隔熱效果加倍，且可以防潮及結露現象的產生。

輕巧便利 易運送
重量極輕，易於安裝搬運及運送。

易於裁切 低粉塵
裁切時只需一般鋸具，讓安裝過程更加快速，且極低粉塵量。   
安裝時只需要少數的人力，大大減低施工成本。

抗菌處理
抗菌處理加工，使細菌與霉菌無法在其內部滋生。

低吸水量
閉孔式發泡極低吸水量，可以避免材料含水而減低隔熱能力，
也不會因吸水而使隔熱板超重導致建築結構及板材本身變形。

節約能源
降低空調使用量，節約能源。

「反射熱輻射」+「降低熱傳導」雙重隔熱複合材，高效阻止熱能傳遞。
鋁箔層 : 利用鋁箔的特性來反射熱輻射降低輻射產生的熱度。
高分子隔熱層 : 以本身的極低傳導特性來阻隔冷、熱的傳導，及聲音的傳遞。
(導熱系數極低約為0.0225W/m.k 為保溫隔熱優良材料)

主要材質 高分子發泡隔熱板/鋁箔 
編號 JNB2AUPIR35
尺寸 2x120x185cm 
產品特性 鐵皮鋼構倉庫、廠房、貨櫃屋、商店和辦公室...等
檢驗認證 甲醛 / 未檢出 . 符合耐燃2級 . 防焰一級 . 具抗菌效果 . 日光反射率 / 73.8%
               熱放射率 / 0.23 . 熱傳導係數 / 0.0225 W/m．k

The best solution for factory building insulation and noise reduction

Excellent thermal insulation properties
Three layers of thermal insulation materials are combined to double 
the sound and heat insulation effect, 
and can prevent moisture and condensation.
Lightweight, convenient and easy to transport
Extremely light weight, easy to install, carry and transport
Easy to cut Low dust
Only ordinary saws are needed when cutting, 
making the installation process faster and with extremely low dust levels.
Only a small amount of manpower is required during installation, 
greatly reducing construction costs.
antibacterial treatment
Antibacterial treatment prevents bacteria and mold from growing inside
Low water absorption
Closed-cell foam has extremely low water absorption, 
which can prevent the material from containing water 
and reducing its thermal insulation capacity. 
It also does not make the insulation board overweight due to water absorption, 
causing deformation of the building structure and the board itself.
Energy saving
Reduce air conditioning usage and save energy